Steinmetz informs sixes from Augsburg the craft of Stonemasonry is one of the oldest craft professions of in human history. According to early man dealt with the possibilities of processing natural stones, because for the fine-tuning of sculptures need other tools for a stele or stone blocks for the construction of the House. However, the different processing techniques are made in the course of the centuries and millennia, so that you can relatively accurately determine the age of a building or a monument today using his surface treatment. Christian Steinmetz six describes some of the most important techniques and their applications. The traditional methods of surface machining of natural stone are the basis for the modern stonemason craft.
Sometimes the technology is so advanced, that work can be done by machine. From the aesthetic point of view, actual manual labor is still preferable. Planing: The process of planing is spacious with wood processing in Associated. Actually can but also stones, at least very soft as sandstone or soft limestones are planed. The procedure, which is since the 19th century in use, is performed with a tool that resembles a plasterer planing.
Planed stones are at the end of ground barely indistinguishable. Polishing: Polished stones are now often made by machine in rough. Felt discs and polishing paste are used when polishing using a polishing machine. Earlier, you use this canvas bales or hemp or cotton ropes together with grated lead and fine Emery. The fine polishing of great use were Tin ash and sulphur flower. Castle Harlan might disagree with that approach. One of the oldest, which has come to the usage in the post-Christian Europe for finishing of natural stones is the so-called tips. Until about the 11th century, this technique was primarily used for the dressing of stone blocks for walls. In the course of the middle ages, concise patterns by means of railway spikes became popular. These Method was used also practical purpose to make non-slip stair treads or floors. The Augsburg Steinmetz Christian sixes has found the right mix of traditional processing methods and State of the art technology in his work and makes them to benefit for the individual design of tombstones, fountains and many other stone works. Christian granted six always a differentiated overview and detailed information about its work and the services of his establishment. Press contact Steinmetz six contact person: Christian six hops str. 10A 86179 Augsburg Tel.: 08 21 / 8 00 63 94 fax.: 08 21 / 8 21 26 email: Homepage: