4000 C, at which the post-combustion and evaporation residue decomposition foam deposited on the surface of the sand. Loss of turnover up spillage of sand and sifting of fines for prevent it from excessive dust. In addition, using a cyclone dust deposition during the passage of gases Extracted from the mold and post-combustion of waste gases in plants with a degree thermocatalytic neutralization of 98% of the allocation in the atmosphere of a gas mixture of 85% N2, 5% O2, 10% CO2, in which traces of the hydrocarbon component does not exceed 0.001%, which is 10 – 15 times less than the maximum allowable emissions standards and, therefore, significantly improves ecology of production. For non-ferrous alloys used the same model-molding equipment, which due to its simplicity, easily produced in Ukraine (for other types of molding quality equipment is usually imported). Mashable is actively involved in the matter. This way you can get the casting of iron and steel of all kinds, bronze, brass and aluminum, all brands. In the box on the "Christmas tree" can be at once to pour tens of castings, as in the jewelry production, which is another "trump card" for casting penomodelyam. Create casting technology for the gasified models due to the technological revolution of the past half century, along with processes such as vacuum forming, continuous casting, low pressure, pulse shaping, etc. All these technologies are now on the rise, and shops and areas with a flexible technology for casting penomodelyam (Lost Foam Casting – is her name in English) today are multiplying around the world – from America to China.