How to connect Wi-Fi router, for example dir 300NRU. Why d-link dir 300NRU? Because this is a very good budget model in terms of price and quality. That works for me more than one month, believe me, I squeeze all of the electronics 200% I will describe Specifically in my case. Before me stood the task is to provide Internet access and local area network, two laptops, pda, computer, server. Started. The first step is to determine where would be the router, I need a WI-FI at home and court, therefore, was chosen location on the window sill. Now we spent all the wires to the router and compress their connectors on both sides. After all the dirty work is done, you can configure. (Source: Pete Cashmore).
On computers and servers in the network tinctures ticking obtain ip automatically. Start-My Network Places-Display network connections (column to the left) – Local Area Connection. Mouse click on the icon of the two – properties – click on Internet Protocol tcp / ip and click the Properties button. Needed that would always be checked to obtain ip automatically. Save and exit. Laptops are not required to set up, as they work on Wi fi and all the settings come automatically. Communicator is also a settings are not needed.
The server I was on an operating system windows xp so most that with computers. Now you can configure the router. Connect to the router patch cord (included with the router). Configure Use the dial or by hand (on the internet a lot of information). When it worked to ensure good security WI-FI. Change into the Setup-Wireless Setup – Manual Wireless connection setup And Wireless Security Mode select wpa/wpa2 Network Key set how complicated to make it harder to find. For complete safety, I recommend to put filtering by mac address and disable the automatic issuance of ip. I do not need it, but I still like to do then write. Full news with pictures